1 Series E87 120d (N47) 5-door
51 12 429
Removing and installing/replacing body
molding for rear bumper
Special tools required:
•
00 9 317
Unclip body molding (1) with special tool 00 9 317 .
If necessary, release connector (1) and pull off body molding (2)
towards rear.
Installation:
Catches (2) on body molding (1) must not be damaged.
Replacement:
If necessary, remove ultrasonic transducer.
RA Removing and installing/replacing body molding for rear bumper
BMW AG - TIS
22.01.2013 17:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -