1 Series E87 120d (N47) 5-door
![background image](/bmw/1_Series_E87/120d_N47_5-door/page-876002.png)
Installation:
Catches (1 and 2) on coupler (3) must not be damaged.
Unclip cable (1) from retaining clips (2) and feed out in direction
of hood/bonnet lock.
Release screws (1) and feed out hood/bonnet lock (2) towards
bottom.
Tightening torque 51 23 2AZ
.
Note:
Hood/bonnet lock (2) shown without attachment parts for
purposes of clarity.
Replacement:
Disengage Bowden cable (1) in direction of arrow from
hood/bonnet lock (2).
RA Removing and installing/replacing right hood/bonnet lock
BMW AG - TIS
22.01.2013 18:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -