1 Series E87 120d (N47) 5-door
54 12 138
Removing and installing/replacing rain gutter
for glass slide/tilt sunroof
Necessary preliminary tasks:
•
Remove glass slide/tilt sunroof lid
Note:
If activating the function when removed:
-
It is essential to ensure that the slide of rain gutter (1) is
situated ahead of connecting element (2).
-
If the slide of rain gutter (1) is situated below the connecting
element, this will result in a collision and damage.
Lever connecting element (2) on left and right out of rain gutter
linkage (1).
Installation:
Linkage must be felt to snap into place in connecting element.
Unclip linkage of rain gutter (1) on left and right out of connecting
element slide (2) towards rear.
RA Removing and installing/replacing rain gutter for glass slide/tilt sunroof
BMW AG - TIS
22.01.2013 19:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -