1 Series E87 120d (N47) 5-door
Release screws (1) and remove expansion valve (2).
Tightening torque 64 53 13AZ
.
Installation:
Place expansion valve (1) exactly on refrigerant
lines (2) and (3).
Fit screws of expansion valve (1) and make sure retainer (4) is
correctly positioned.
After installation:
•
Evacuate and fill A/C system
RA Removing and installing or replacing expansion valve
BMW AG - TIS
22.01.2013 20:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -