1 Series E87 120d (N47) 5-door
64 53 701
Replacing line from evaporator to condenser
(N47)
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit.
If A/C system is opened for more than 24 hours:
Replace desiccant insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove intake filter housing
•
Remove cowl panel cover
•
Remove both tension struts from spring strut dome
Release screws (1) and remove refrigerant line.
Installation:
Replace sealing rings and moisten with refrigerant oil.
Tightening torque 64 53 2AZ
.
RA Replacing line from evaporator to condenser (N47)
BMW AG - TIS
22.01.2013 20:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -