1 Series E87 120d (N47) 5-door
65 50 055
Removing and installing/replacing central
information display
Necessary preliminary tasks:
•
Remove centre fresh air grille
•
Remove Car Communication Computer
Open monitor (1) as illustrated.
Unfasten screws (2).
Release screws (1).
Disconnect plug connection (2) and release associated wiring
harness.
Installation:
Make sure wiring harness is correctly laid and secured.
Raise central information display (3) on passenger side.
Disconnect plug connection (4).
Feed out associated wiring harness and remove central
information display (3).
Installation:
Make sure wiring harness of central information display (3) is
correctly routed.
RA Removing and installing/replacing central information display
BMW AG - TIS
22.01.2013 20:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -