1 Series E87 120i (N43) 5-door
Unplug ignition coil connector (1).
Disconnect all four plug connections (1) of fuel injectors (2).
Note:
Risk of damage to the clips when removing the connector!
Loosen nut and pull off ground cable (1) upward.
Unplug connector (1) from high-pressure pump (2).
RA Replacing engine wiring harness (N43)
BMW AG - TIS
23.01.2013 07:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -