1 Series E87 120i (N43) 5-door
Tighten nuts of delivery line (1) in illustrated sequence.
Tightening torque 13 53 4AZ
.
Install feed line (1).
In so doing, tighten nut (2) and screw (3) hand-tight only.
Tighten nut (1).
Tightening torque 13 53 4AZ
.
Tighten down screw.
Tightening torque 13 53 5AZ
.
Connect contact plug (1) to low-pressure sensor (2).
RA Removing and installing or replacing high-pressure fuel pump (N43)
BMW AG - TIS
23.01.2013 07:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -