1 Series E87 120i (N46) 5-door
Removing:
Press plastic ring (2) into quick-connect coupling (1) and remove coupling (1).
Assembly:
When replacing hydraulic line: remove transportation lock (T).
Push quick-connect coupling (1) onto pipe (3) until both indication pins (4) can be seen and felt to point outwards
at outside diameter of housing.
To check that quick-connect coupling (1) has been correctly fitted, feel indication pins (4) at outside diameter of
housing. When correctly seated, indication pins (4) cannot be pressed into housing.
Important!
Coupling is not correctly engaged if both indication pins (4) fail to protrude from housing. Leakage is thus
unavoidable.
RA Notes on hydraulic line with quick-connect coupling
BMW AG - TIS
24.01.2013 07:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
