1 Series E87 120i (N46T) 5-door
Unlock and disconnect plug connection (1) on camshaft sensor in
direction of arrow.
Installation:
Lock on plug (1) must snap audibly into place.
Release screw plug (see arrow).
Installation:
Replace sealing ring.
Important!
Take care - screw can fall down very easily.
Remove screw of chain guide.
Important!
Do not release nuts.
RA Removing and installing/sealing cylinder head (N46T)
BMW AG - TIS
25.01.2013 02:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -