1 Series E87 120i (N46T) 5-door
11 23 010
Removing and installing or replacing
vibration damper (N46T)
Special tools required:
•
11 8 181
•
11 8 182
Necessary preliminary tasks:
•
Remove alternator drive belt.
Mount special tool 11 8 181 on transmission.
Lock flywheel with special tool 11 8 182 .
3-hole:
Release bolts and remove vibration damper (1).
Installation:
Fit vibration damper (1) on crankshaft hub, insert and tighten
down screws.
Tightening torque, 11 23 1AZ
.
RA Removing and installing or replacing vibration damper (N46T)
BMW AG - TIS
25.01.2013 03:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
