1 Series E87 120i (N46T) 5-door
11 37 005
Removing and installing/replacing eccentric
shaft (N46T)
Special tools required:
•
11 9 320
Necessary preliminary tasks:
•
Remove ignition coils.
•
Remove spark plugs.
•
Remove cylinder head.
•
Remove inlet and exhaust adjustment unit.
•
Remove inlet camshaft.
Turn bearing bracket (1) round and deposit with eccentric shaft
upwards in special tool 11 9 320 .
Clamp special tool 11 9 320 as illustrated in a vice.
Release screws and remove eccentric shaft sensor (1).
RA Removing and installing/replacing eccentric shaft (N46T)
BMW AG - TIS
25.01.2013 03:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -