1 Series E87 123d (N47S) 5-door
Remove gasket (1).
Remove gasket debris from sealing face and clean sealing face.
Apply a thin and even coat of Drei Bond 1209 liquid sealant
(sourcing reference: BMW Parts Service) in area of arrows
•
at end cover to engine block
Important!
Oil sump gasket must not be lubricated.
Install oil sump with a new gasket.
Installation:
Special tools 11 8 780 are only necessary if transmission is
removed.
Position special tools 11 8 780 with transmission bolts (1) so
that engine oil sump is exactly flush with engine block.
Secure engine oil sump.
Assemble engine.
RA Removing and installing, sealing or replacing oil sump (N47, N47S)
BMW AG - TIS
26.01.2013 01:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -