1 Series E87 123d (N47S) 5-door
11 14 151
Replacing crankshaft seal at rear (N47, N47S)
Special tools required:
•
11 8 810
•
11 8 811
•
11 8 812
•
11 8 813
•
11 8 815
Necessary preliminary tasks:
•
Remove transmission.
•
Drain engine oil.
•
Remove flywheel.
•
Remove FPM ring using suitable tool.
Important!
FPM rings must be installed in a dry condition.
Do not use engine oil or lubricant.
Position special tool 11 8 815 on crankshaft.
RA Replacing crankshaft seal at rear (N47, N47S)
BMW AG - TIS
26.01.2013 01:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
