1 Series E87 123d (N47S) 5-door
Turn over engine twice with special tool 11 6 480 up to ignition
TDC position of cylinder No. 1.
Check camshaft setting.
Important!
Do not turn the engine back.
Assemble engine.
Turn over engine twice.
Check timing.
Important!
Special tool 11 5 320 must be removed before engine is
started.
RA Checking camshaft timing (N47, N47S)
BMW AG - TIS
26.01.2013 01:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -