1 Series E87 123d (N47S) 5-door
Set down all rocker arms (1) in neat order in special tool
11 4 480 .
Installation:
Reuse rocker arms in the same positions.
Remove compensating element (1) in direction of arrow.
Installation:
If reusing compensating elements (1), set down in neat order in
special tool 11 4 480 .
Reuse compensating elements in the same positions.
Installation:
Make sure rocker arms are in correct installation positions.
Place camshaft carrier on cylinder head.
Tighten bolts in sequence (1 to 14).
Tightening torque:11 31 3AZ
.
Adjust valve timing.
Assemble engine.
RA Removing and installing/replacing all hydraulic valve clearance compensating ele
BMW AG - TIS
26.01.2013 01:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -