1 Series E87 123d (N47S) 5-door
18 40 040
Removing and installing, sealing/replacing
exhaust manifold (N47S)
Necessary preliminary tasks:
Remove exhaust-gas recirculation cooler
Remove both exhaust turbochargers
Release screws.
Remove heat shield.
Release nuts, remove exhaust manifold (1) from cylinder head.
Installation:
Tightening torque: 11 62 1AZ
Clean connection points and fit new seals.
Important!
Manifold gaskets are graphite-coated on one side!
The graphite coating must be fitted on the manifold side.
RA Removing and installing, sealing/replacing exhaust manifold (N47S)
BMW AG - TIS
26.01.2013 02:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
