1 Series E87 123d (N47S) 5-door
Withdraw special tool from clutch plate with aid of accompanying
screw (1).
Installing removed SAC clutch with new clutch plate:
Installation:
Screws must be replaced.
Jointing torque and angle of rotation must be observed without
fail.
Important!
Before installing an SAC clutch which has been in service with
a new clutch plate: always reset adjustment ring in new
position.
Set SAC clutch down on a clean surface.
Install special tool 21 2 180 in SAC clutch (1).
RA Removing and installing or replacing clutch (SAC 240)
BMW AG - TIS
26.01.2013 02:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -