1 Series E87 130i (N52) 5-door
12 14 524
Replacing exhaust camshaft pulse generator
(N52, N52K, N51, N53)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
If necessary, remove radiator cover
Unlock plug (1) and remove.
Release bolt.
Installation:
Replace screw.
Tightening torque 12 14 4AZ
.
Remove pulse generator (2).
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing exhaust camshaft pulse generator (N52, N52K, N51, N53)
BMW AG - TIS
27.01.2013 05:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -