1 Series E87 130i (N52) 5-door
Press retainer (1) in balance arm (2) forward in direction of
arrow.
Detach handbrake Bowden cables (3) from balance arm (2).
Remove expander lock for handbrake shoes.
Release screw (1) and remove holder (2).
Pull handbrake cable out of wheel carrier.
Installation:
Tightening torque 34 41 2AZ
.
Disconnect handbrake cables from holders (1).
Pull handbrake cables towards rear out of guide tube.
RA Removing and installing or replacing both handbrake Bowden cables
BMW AG - TIS
27.01.2013 08:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
