1 Series E87 130i (N52) 5-door
65 81 060
Removing and installing/replacing outside
temperature sensor (M3)
Release screws (1 and 2).
Remove tip of engine compartment shield (3) on left/right.
Installation:
Make sure tip of engine compartment shield (3) is installed in
correct position.
Disconnect plug connection (1).
Unclip outside temperature sensor (2) in direction of arrow and
remove.
Installation:
Outside temperature sensor (2) must audibly snap into place.
Ensure correct seating in air duct (3).
RA Removing and installing/replacing outside temperature sensor (M3)
BMW AG - TIS
27.01.2013 15:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
