1 Series 120i (N46T) Convertible
33 10 ...
Removing and installing/replacing vibration
damper
Variant A:
Release screw (1).
Tightening torque 33 17 2AZ
.
Remove vibration damper (2).
Variant B:
Release bolt (1) and remove vibration damper (2).
Tightening torque 33 17 3AZ
.
Variant C:
Note:
Removal depicted on left vibration damper.
Release bolt (1) and remove vibration damper (2).
Tightening torque 33 17 3AZ
.
Variant D (E93):
Remove left and right tension struts (on rear axle).
Release bolts (1) and remove vibration damper (2).
Tightening torque 33 33 3AZ
.
RA Removing and installing/replacing vibration damper
BMW AG - TIS
16.01.2013 13:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -