1 Series 125i (N52K) Convertible
Important!
Do not distort conrods or crankshaft.
Use the old conrod bolts to check conrod clearance.
Tighten down conrod bolts with special tool 00 9 120 .
Tightening torque 11 24 1AZ
.
Unscrew conrod bearing cover. Read off conrod bearing play at
width of flattened plastic thread on measurement scale.
Conrod bearing clearance.
•
Remove Plastigage
•
Coat crankshaft and connecting rod bearing shells with oil
•
Install new conrod bolts and tighten down with special tool
00 9 120 .
Tightening torque 11 24 1AZ
.
Assemble engine.
RA Replacing all connecting rod bearing shells (N52K)
BMW AG - TIS
17.01.2013 05:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -