1 Series 125i (N52K) Convertible
Unlock quick-release fastener (1) and detach vent line (2).
Detach vent line (2) from holder (3).
Heavily support the fuel tank.
Unfasten nut.
Installation:
Replace self-locking nut.
Tightening torque, 16 11 1AZ
.
Release screws for tightening straps on left and right and remove
tightening straps.
Carefully lower fuel tank.
Important!
Carefully feed the vent line through the body when lowering
the fuel tank.
Installation:
Tightening torque 16 11 2AZ
.
RA Removing and installing or replacing fuel tank (petrol/gasoline)
BMW AG - TIS
17.01.2013 07:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -