1 Series 125i (N52K) Convertible
Identification SAC clutch (Self-Adjusting Clutch):
-
3 openings each with a pressure piece (1) of adjustment ring
and a pressure spring (2)
Note:
Illustration shows new position of pressure pieces.
Block flywheel with special tool 11 9 260 .
Unfasten bolts and remove SAC clutch from flywheel.
Important!
Do not use a special tool to detach SAC clutch from flywheel.
Remove clutch plate (1) from flywheel.
Clean flywheel, check for wear and damage.
Replace damaged flywheel.
Check grooved ball bearing in crankshaft for ease of movement
and tightness and if necessary replace grooved ball bearing.
RA Removing and installing or replacing clutch (SAC 228)
BMW AG - TIS
17.01.2013 07:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -