1 Series 125i (N52K) Convertible
Screw in special tool 24 5 361 until it is firmly connected with
shaft seal.
Screw special tool 24 5 362 onto special tool 24 5 361 and
tighten down.
This pulls the shaft seal out of the transmission housing.
Oil sealing lip on shaft seal.
Screw in shaft seal with special tools 24 4 381 and
24 4 382 as far as it will go.
RA Replacing selector shaft seal (GA6L45R)
BMW AG - TIS
17.01.2013 07:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -