1 Series 125i (N52K) Convertible
Remove transmission oil sump.
Unlock sealing sleeve with slide (1).
Note position of sealing sleeve.
Pull out sealing sleeve (1).
Installation:
Screw in sealing sleeve partially (lug in upper area). Turn until lug
engages in groove of transmission. Slide in sealing sleeve.
Lug on sealing sleeve must not be damaged!
Release all bolts (1) with special tool 24 4 350.
Remove mechatronics.
RA Replacing mechatronics (GA6L45R)
BMW AG - TIS
17.01.2013 07:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -