1 Series 125i (N52K) Convertible
Version 2 (shift lever knob and shift lever one single part):
Press installation frame of gaiter (1) together a little and remove
gaiter from centre console.
Important!
Start removing at front left, otherwise the frame may be
damaged.
Note:
Do not twist knob during removal as this would cause the
turning lock in the knob to shear off.
Tug firmly to remove knob.
Installation:
Fit knob on shift lever, align and press on until it snaps
noticeably into place.
RA Replacing knob for shift lever
BMW AG - TIS
17.01.2013 08:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -