1 Series 125i (N52K) Convertible
Version with Electric Power Steering (EPS):
Cut open cable tie (1) for connecting line on front axle carrier.
Warning!
Risk of injury!
Failure to comply with the following instructions may result in
the vehicle slipping off the lifting platform and critically injuring
other persons.
When supporting components, make sure that
•
the vehicle can no longer be raised or lowered
•
the vehicle does not lift off the locating plates on the
lifting platform
Engage special tool 31 5 251 with a 2nd person helping
completely on workshop jack 00 2 030 .
Insert special tools 31 5 253 in telescopic supports of a profile
rail pair.
Note:
In a profile rail pair two profile rails are connected to each by
toothing.
Insert special tools 31 5 256 in telescopic supports of other
profile rail pair.
Note:
The jacking points on the left side are shown.
Align special tools 31 5 253 and 31 5 256 to front axle
carrier.
Support front axle carrier by operating workshop jack 00 2 030 .
RA Lowering/raising front axle carrier (universal lifter)
BMW AG - TIS
17.01.2013 09:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -