1 Series 125i (N52K) Convertible
33 21 035
Replacing gaiter on left output shaft (altered
sealing cover)
Special tools required:
•
21 2 120
•
26 1 110
•
33 2 100
Necessary preliminary tasks:
•
Remove output shaft
Removing inner gaiter:
Clean output shaft and clamp with a cloth in vice.
Unfasten hose clip (1).
Using a suitable tool, force gaiter cap (2) off joint or sealing
cover.
Push back gaiter with cap.
Important!
Risk of damage!
Make sure that joint does not fall apart.
Clamp joint (1) in vice.
Using a suitable tool, force sealing cover (2) off joint (1).
RA Replacing gaiter on left output shaft (altered sealing cover)
BMW AG - TIS
17.01.2013 09:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -