1 Series 125i (N52K) Convertible
Installation:
Tightening torque 34 32 2AZ
.
Important!
Never twist brake hose when installing it and avoid all contact
with parts attached rigidly to the body.
Note:
First tighten brake hose on brake caliper.
Move wheels into straight-ahead position.
Insert brake hose in bracket and screw onto brake pipe.
Unscrew guide bolts (1).
Remove brake calliper by pulling upwards.
Installation:
Clean guide screws only; do not grease.
Check threads.
Replace all guide screws which are not in perfect condition.
Tightening torque 34 11 4AZ
.
RA Removing and installing or replacing front left or right brake calliper (Teves)
BMW AG - TIS
17.01.2013 10:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -