1 Series 125i (N52K) Convertible
34 52 535
Replacing a rear pulse generator
Necessary preliminary tasks:
•
Remove wheels.
•
Read and comply with General Information.
Slacken nut (1).
Pull wheel arch trim (2) gently to one side.
Disengage cable from holders (3).
Disconnect plug connection (1).
Installation:
Ensure proper locking of the plug connector and proper seating of
the cable in the brackets.
Disengage cable from holders (1).
Unfasten socket head cap screw (2).
Withdraw wheel speed sensor (3) from bore hole.
Installation:
Tightening torque 34 51 4AZ
.
Clean bore for pulse generator and lubricate with Staburags
NBU 12/K grease.
RA Replacing a rear pulse generator
BMW AG - TIS
17.01.2013 10:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -