1 Series 125i (N52K) Convertible
![background image](/bmw/1_Series_E88/125i_N52K_CONVER/page-657002.png)
Carry over the work step shown symmetrically to the other side of
the vehicle.
Loosen nut (1).
Tightening torque 41 63 5AZ
.
Close convertible top compartment lid.
Open rear lid.
Carry over the work step shown symmetrically to the other side of
the vehicle.
Remove protective caps (1) and slacken screws underneath.
Tightening torque 41 63 4AZ
.
Adjust convertible top compartment lid laterally and longitudinally.
Close rear lid.
Adjusting convertible top compartment lid in relation to side panel:
Open convertible top compartment lid.
Important!
Risk of injury!
Secure convertible top compartment lid against falling closed.
Adjust height by turning stop buffer.
Close convertible top compartment lid.
After installation:
•
Tighten all screws and nuts to specified torque.
•
Touch up unpainted surfaces in the appropriate colour.
RA Adjusting convertible top compartment lid
BMW AG - TIS
17.01.2013 11:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -