1 Series 125i (N52K) Convertible
![background image](/bmw/1_Series_E88/125i_N52K_CONVER/page-687002.png)
Release screws (1) on bumper trim (2).
Important!
Risk of damage!
Do not detach bumper trim (1) at sides
The following work must be carried out with a second person
assisting:
Note:
Picture shows E92.
Pull bumper trim (1) towards rear and release from catches (2).
Press down catch (2).
Remove bumper trim (1) towards rear with aid of a 2nd person.
If necessary, disconnect plug connection on ultrasonic
transducers.
Installation:
Catches (1) and guides (2) must not be damaged.
If necessary, replace faulty sheet nuts (3) on left/right.
Replacement:
•
If necessary, modify ultrasonic transducer
•
Modify towing eye cover
RA Removing and installing/replacing rear bumper trim
BMW AG - TIS
17.01.2013 11:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -