1 Series 125i (N52K) Convertible
51 21 180
Removing and installing/replacing cover on
outside handle
Lever out cap (1) and release screw underneath.
Installation:
If necessary, replace faulty trim (1).
Pull off cover (1) in direction of arrow with outside door
handle (2) opened slightly.
Version with light package:
Installation:
Make sure outside door handle light (1) is correctly positioned in
area (2).
Guides (3) of outside door handle light (1) must be correctly
seated in carrier for outside door handle (4).
Installation:
Guides (1) must not be damaged.
RA Removing and installing/replacing cover on outside handle
BMW AG - TIS
17.01.2013 11:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -