1 Series 125i (N52K) Convertible
51 16 ...
Removing and installing/replacing inside
corner trim on front door
Necessary preliminary tasks:
Version with speaker:
•
Remove door trim panel
Push corner trim (1) slightly upward and release in inward
direction from retainers (2).
Remove corner trim (1) from seal (3) and door trim panel (4).
If necessary, disconnect plug connection and remove corner trim
(1).
Installation:
If necessary, moisten seal (3) with water in order to fit corner trim
(1).
Ensure the corner trim (1) is seated correctly on seal (3) and door
trim panel (4).
Installation:
Catches (1) and sound insulation (2) of corner trim must not be
damaged.
Replacement:
•
Modify speaker
RA Removing and installing/replacing inside corner trim on front door
BMW AG - TIS
17.01.2013 11:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -