1 Series 125i (N52K) Convertible
![background image](/bmw/1_Series_E88/125i_N52K_CONVER/page-796002.png)
Unclip coupler (1) with special tool 00 9 317 in direction of
arrow.
Installation:
Catches (1 and 2) on cable for hood/bonnet lock (3) must not
be damaged.
Unclip cable (1) from retaining clip (2) and feed out through front
panel (3).
Installation:
Retaining clip (2) must not be damaged.
RA Removing and installing/replacing cable for hood/bonnet lock (in engine compartm
BMW AG - TIS
17.01.2013 14:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -