1 Series 125i (N52K) Convertible
Note:
Prior to removing, pay attention to the exact installation position
with respect to the adjoining components.
Important!
Risk of damage!
The weatherstrip (4) can bend when lifted out too far.
Attach adhesive tape under window cavity cover strip (4)
(damage to paintwork).
Detach seal (1) at retaining elements (2) and shaped part (3)
from side panel.
Using special tool 00 9 311 beginning at rear, carefully lever out
window cavity cover strip (4).
Installation:
Ensure seal (1) is correctly seated.
Retaining elements (2) and shaped part (3) must not be
damaged.
If necessary, moisten window cavity cover strip (4) prior to fitting
with approved anti-friction agent .
RA Removing and installing or replacing outer window cavity cover strip for door wi
BMW AG - TIS
17.01.2013 14:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -