1 Series 125i (N52K) Convertible
51 43 012
Replacing rear left or right side trim panel
upper section
Important!
Risk of damage!
When working on trim panel components, make sure that the
sensitive surfaces are not scratched or damaged.
Necessary preliminary tasks:
•
Remove side trim panel upper section at rear
Unclip Bowden cable (1) from catch (2).
Installation:
Catch (2) must not be damaged.
Slide back trim (1).
Unclip Bowden cable (2) in direction of arrow from catch on trim
(1) and remove towards rear.
Installation:
Catch on trim (1) must not be damaged.
RA Replacing rear left or right side trim panel upper section
BMW AG - TIS
17.01.2013 14:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -