1 Series 125i (N52K) Convertible
51 47 ...
Removing and installing/replacing left or right
underbody panelling
Necessary preliminary tasks:
Only if removing left underbody panelling:
•
Remove rear underbody protection
Note:
Prior to removing, pay attention to the exact installation position
with respect to the adjoining components.
The operation is described on the left side; proceed in the same
way for the right side.
Release clips (1).
Release plastic nuts (2).
Unfasten screws (3 and 4).
Feed out underbody panelling and remove towards bottom.
Installation:
If necessary, replace faulty clips (1) and plastic nuts (2).
Replacement:
•
Modify lip (1)
•
Modify sheet nuts (2)
Installation:
If necessary, replace faulty metal nuts (2).
RA Removing and installing/replacing left or right underbody panelling
BMW AG - TIS
17.01.2013 16:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -