1 Series 125i (N52K) Convertible
61 35 115
Removing and installing/replacing footwell
module
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove footwell side trim panel on A-pillar, left
Disconnect plug connection (1).
Release nuts (2) and remove footwell module (3).
Replacement:
Carry out vehicle programming/coding.
RA Removing and installing/replacing footwell module
BMW AG - TIS
17.01.2013 17:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -