1 Series 125i (N52K) Convertible
65 77 770
Removing and installing (replacing) rollover
controller
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove backrest for rear seat
Disconnect plug connection (1).
Release screws (2) and remove rollover controller (3).
Installation:
Replace screws (2).
Tightening torque 65 77 7AZ
.
Replacement:
Release screws (1) and remove rollover controller (2) from holder
(3).
Installation:
Replace screws (1).
Tightening torque 65 77 8AZ
.
RA Removing and installing (replacing) rollover controller
BMW AG - TIS
17.01.2013 18:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -