1 Series 125i (N52K) Convertible
65 77 720
Removing and installing (replacing) left B-
pillar sensor
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection)!
Necessary preliminary tasks:
•
Disconnect battery negative lead and cover
•
Remove rear side trim panel
Important!
Direction arrow (3) must point when viewed in direction of
travel outwards!
Release screws (1).
Remove sensor and disconnect plug connection (2).
Installation:
Tightening torque 65 77 3AZ
.
RA Removing and installing (replacing) left B-pillar sensor
BMW AG - TIS
17.01.2013 18:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -