1 Series 125i (N52K) Convertible
Release bolts (1).
Feed CD drive for Car Communication Computer (2) in direction
of arrow out of Car Communication Computer (3) and set down.
Installation:
Ensure correct routing of cables.
Release bolts (1).
Remove CD drive trim (2) in direction of arrow from CD drive for
Car Communication Computer (3).
Installation:
Ensure correct routing of cables.
Cut through warranty seal (1) at marked point.
Release screw (2).
Lift side cover out of mounting (3) and carefully place to one side.
Disconnect plug connection (1) and remove CD drive.
Installation:
Ensure correct routing of cables.
RA Removing and installing/replacing CD drive for Car Communication Computer
BMW AG - TIS
17.01.2013 18:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -