1 Series 125i (N52K) Convertible
86 10 ...
Replacing position light
Unclip cover (1) on side recess (arrow).
Pull flat connector (1) from flat contact.
Pull out cable (1) completely.
Caution!
Before drilling out rivet heads, drive in rivet pins with a punch.
Drill out rivet heads (2) and remove position light housing from
front.
RA Replacing position light
BMW AG - TIS
17.01.2013 19:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -