1 Series 125i (N52K) Convertible
86 21 ...
Installing hood seal
Note:
Removing old seal:
In a straight area of hood, grip old seal piping with a pair of
pliers and pull off horizontally. Grip detached seal with both
hands and uniformly pull away from hood ridge.
Push seal piping (1) by hand onto hood ridge (2). Using a rubber
hammer, gently tap seal piping (1) as far as it will go onto hood
ridge (2). Make sure piping is evenly positioned especially in radii
of hood ridge.
Installation:
Position end face of seal at front end of hood in a straight
area. Lay seal from front to rear.
RA Installing hood seal
BMW AG - TIS
17.01.2013 19:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -