1 Series 128i (N52K) Convertible
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Tightening torque 24 71 1AZ
.
-
Remove propeller shaft.
Important!
Do not allow propeller shaft to hang from fixed ball joint (risk
of damage).
Crank engine at vibration damper in direction of rotation until
screw (1) is visible in opening.
Release all screws of torque converter with special tool
24 1 110 .
Crank engine further and release remaining 5 bolts.
Tightening torque 24 40 1AZ
.
Prepare special tool (1) 24 4 161 with shaped piece (2)
24 4 165 .
RA Removing and installing automatic transmission (GA6L45R)
BMW AG - TIS
18.01.2013 03:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
