1 Series 128i (N52K) Convertible
Open convertible top (see picture).
Remove expander rivets (1) and fold convertible top
compartment base (2) to one side.
Press luggage compartment wheel arch trim a little to one side
and remove protective cap.
Release nut (1); if necessary, grip at hexagon head.
Remove support bearing upper section (2).
Installation:
Replace support bearing upper section (2).
Tightening torque 33 52 1AZ
.
Press shock absorber together and remove from wheel arch.
Installation:
Remove support bearing (lower section), check for damage and if
necessary replace.
Check auxiliary damper and protective tube for damage, replace if
necessary.
RA Removing and installing/replacing rear left or right shock absorber
BMW AG - TIS
18.01.2013 05:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
