1 Series 128i (N52K) Convertible
51 12 ...
Removing and installing/replacing lower
cover on rear bumper
Note:
Prior to removing, pay attention to the exact installation position
with respect to the adjoining components.
Release screws (1 and 2).
Feed out cover (3) towards rear and remove.
Installation:
Make sure cover (3) is correctly seated.
Replacement:
•
Modify sheet nuts, replace faulty sheet nuts if necessary.
RA Removing and installing/replacing lower cover on rear bumper
BMW AG - TIS
18.01.2013 06:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -