1 Series 128i (N52K) Convertible
Release rubber collar (1) from cover bowl (2) by pressing inward.
Note:
Rubber collar (1) remains attached to vehicle.
Press retaining strap (1) inwards and remove.
Remove rubber pads (2).
Note:
Rubber pads (2) are replaced with a new cover bowl.
Note:
For purposes of clarity, picture shows cover bowl removed.
Insert screwdriver to a depth of max. 5 mm and unlock cover
bowl catch.
Keep cover bowl tensioned with pliers (2).
Unlock catches individually with screwdriver (1).
Unlock catches in following order:
1.
Top left
2.
Bottom left
3.
Top right
4.
Bottom right
Move screwdriver in opposite direction at both lower catches.
RA Replacing cover bowl
BMW AG - TIS
18.01.2013 06:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -